For the same protected height, Cross Beam Light Curtains are more sensitive as there is more number of active beams in the same area.
Following models are available:
- Easy to install & may be mounted in any position with non-critical alignment between sensors.
- Switches are provided for blanking / by-passing individual channels.
- Sensors can be connected directly to PLC for further interlock
- Barrier operates on micro controller based cyclic scanning photo-electric infra-red techniques.
- Various barrier range heights are available from covering 100mm to 1000mm. higher covering heights available upon request.
- Use of solid state components & special construction technique ensures that barrier is not affected by normal vibrations & shocks.
- For Sensors, connections are provided through plug in connectors.
- Self Checking Circuitry continuously monitors failure of any of the beam in the system and stops the machine if failure detected.
- LED Indications are provided for status indication of each channel
- LED Indication for Output and Sense.
Hand Protection’s more specifications
|
Pitch offered (mm)
|
Hand: 20/30/40/50, Finger: 11/20, Body: 90
|
|
Max Range
|
Adjustable up to 3 meter( 5 meter maxpossible)
|
|
Electrical Connections
|
Adjustable up to 3 meter( 5 meter maxpossible)
|
|
Standard Cable length
|
5 meters for Emitter, 3 meter for Receiver
|
|
Operating Temperature
|
up to 55 Degrees centigrade
|
|
Fastening Modes
|
Back Slot for adjustable height
|
|
Cross Section
|
36 x 42 mm
|