Oval gear flow Meters made available by DMS Control Sysytem are applicable in every area such as Agricultural, Chemical, Pharmaceutical, Research-Institutes, Bio-technology Laboratories, Hospitals etc.
These devices have been designed with respect to the scientific precision that is accepted in analytical instruments requirements.DMS offered flow Meters come with Positive Displacement Oval Gear Sensor contains a pair of oval gear rotors.These meters are capable for measuring big range of clean lubricated liquids, fuel & oils. Blind flow sensor with pulse output is capable of interfacing to most of monitoring & controlling instruments or systems such as Rate Indicators, Tantalizers, Batchers & Rate Switches, also out puts of 4-20mA , RS-232, RS-485, etc.
Positive Displacement Oval Gear sensors where the liquid passage causes
two oval gear rotors to rotate within a precious measuring chamber and witheach of rotation a fixed volume of liquid is displaced passing through thesensor. Magnets which are inserted in the rotors transfer pulse train output.The pulse output can interface to monitoring/process control instrument.
Specifications
Input Voltage: 5 to 24 VDC
Output Voltage: Square wave (Sinking) of 5-24V Open collector NPN type.
Protecting Rating: IP -67 Operating
Temp: -20 TO 80 Oc
Pressure: 25 bar
Accuracy +- 1% of reading Repeatability Typically +-0.5%
Minimum [ LPM / LPH ] 0.1 / 6.0 1 / 60 3.33 /200
Maximum [ LPM / LPH ] 15 / 200 40 / 1500 83.33 /5000
MOC-Body Aluminum MOC Rotor Aluminum
MOC-Shaft Tool steel ‘O’ ring Viton